[EononCarDVD]

Hi kapazo, good job. :nice: Would you like to take some pictures/videos of your car dashboard with eonon unit installed? We will be much happier to receive your sharing.

 

[EononCarDVD]

Used the info in this post today to have the climate control info displayed after replacing factory radio for a JVC single din unit. I have a 2004 Jap import Mazda 3 and used an 06 lcd display. Thanks for all the great info.

You are welcome, kbushnz. Please feel free to PM us if you have any questions on our products. We will do our best to help you, thanks.

 

[EononCarDVD]

Hello guys!
Big thanks to seanlin08 for the great tutorial, I got my LCD work again. I have a 2004 Mazda 3 sedan, had the stock 2004 radio with info key and factory enabled trip computer. I swapped the head unit to Eonon GA8151, and since then the stock LCD was not working (as we all know). I had doubts if it will work properly, but purchased a 2007 LCD from a scrapyard, soldered and installed it based on seanlin08s tutorial, and it's working great. I have all the functions working, just like before. I have climate control, clock and all 4 modes of the trip computer. It even shows radio frequency, Bluetooth mode, DVD play time (this one is buggy, only loops from 0-9 sec, I think it's a head unit issue) etc. I can cycle through the trip computer and even set the clock by the steering wheel buttons. I didn't install 2007 radio for this, left the Eonon unit installed, just swapped the LCD, and everything works fine. FYI I have the red SS-02 CAN bus adapter. You can check by long pressing MODE button on the steering wheel, if you hear beep sound, you have the right CAN bus adapter. I hope this helps for others, who have doubts, like I had :wink2:

Awesome, thank you very much for sharing your passion with us! :nice: We also learn a lot from you.