Hello everyone I’m new to this community I recently bought a 2010 Mazda 3 2.0L hatchback and I wanted to know if the doors off of a 2009 Mazda 3 hatchback would fit my 2010.

2009 Mazda 3, sedan, 2.0l Standard no mods Hello all, I have just changed my inner and outer tie rods and now doing the wheel alignment using the "String Method". The drivers side is 1/8" = 1.6mm toed-in (within spec) The passenger side is 3mm toed in which needs adjusting. My question is...

Hi, So my son's Mazda 3 started throwing code P0758, transmission was on limp mode. I cleared the codes, and nothing, as soon as I put the car into D, codes came back. I research a little online and most of the people pointed to the TCM module being bad. These 2.0l cars don't have a TCM, the...

I’m trying to install the Flexplates it was already apart when I got the car both sides have bolt groves so idk. One side does have a little pad or half inch by half Inch pad .is that the side that should go towards the tor. Converter? Any help would be great I can post pictures if they will...

This post is a bit poor as im currently posting from my phone. So its a work in progress. Ill. Add step by step purchase list, total cost, and proof in pictures. And a q&a section. My goal is to get a sticky. I wanted to share with the community that I successfully swapped a 2.5l into my 2004...