Mazda3 Forums banner

WTB Race Pipe

694 Views 13 Replies 4 Participants Last post by  NYKNIGHT
I have a MS Exhaust and would like to put a race/test pipe on that baby for some more ponies. If anyone has one that I could slip on one end and bolt up on the other and would like to sell please let me know. Or if you know someone who could fab a SS one up for me for a decent price shipping to NYC please let me know. Thanks
1 - 14 of 14 Posts
I think it should be cheap just to go to an exhaust shop and have one made.
[quote author=Chrio link=topic=68909.msg1193063#msg1193063 date=1170884740]
I think it should be cheap just to go to an exhaust shop and have one made.
[/quote]

indeed. mine cost 100 which included fab of the pipe and install
Ive tried and they wont do it, they are all chicken. Once they hear test/race pipe they dont want to have anything to do with it. They say we won't delete or will have nothing to do with deleting your cat. I will keep on looking however I have had no luck, that is why I made this thread
same prob i had with mine, so i found a person (not company) to make it for me. 100% stainless pipe, welded flange, and install. took total of like 3 hours (had to go to hardware store for new bolts) and cost me 80 bucks. fyi its on a borla exhaust. companies wont, but people with welders will.
[quote author=*txmica3* link=topic=68909.msg1193236#msg1193236 date=1170889435]
same prob i had with mine, so i found a person (not company) to make it for me. 100% stainless pipe, welded flange, and install. took total of like 3 hours (had to go to hardware store for new bolts) and cost me 80 bucks. fyi its on a borla exhaust. companies wont, but people with welders will.
[/quote]

Thats exactly what I'm looking for. I would really like to have my ms exhaust flanged and have both sides of the race pipe flanged. But to make things easy all I am looking for is a damn straight pipe that will slide into the ms exhaust at one end and bolt on at the other. GRRRRR, I am jealous
my guy did that for my borla...he flanged one end of the race pipe and the other fits in and clamps into the end of the borla.
[quote author=saluteTOme link=topic=68909.msg1193295#msg1193295 date=1170890819]
my guy did that for my borla...he flanged one end of the race pipe and the other fits in and clamps into the end of the borla.
[/quote]

not fair at all
haha, well if you were in houston area id get you this guys name, hes good at custom parts and stuff. welds, cuts, sizes, etc. everything you need for however long it takes, flat rate. he basically told me 80 if its straight and simple, 100-120 if it bends or has sensor holes everywhere or stuff like that.

but since your in ny (or so it says) your SOL :p
knight...there has to be a place around you that can do it. If not, if you want to take a trip to edison, I am sure my guy would be happy to do it for you.
[quote author=saluteTOme link=topic=68909.msg1193315#msg1193315 date=1170891412]
knight...there has to be a place around you that can do it. If not, if you want to take a trip to edison, I am sure my guy would be happy to do it for you.
[/quote]

hmmm, the only time I go to NJ is driving through on 80 to the pocono's. Im not sure edison is on that route
hey Salute, how much did they charge to fab the race pipe on your borla. Should be pretty much the same. I'm not to sure of the size in diameter difference but it is the same concept, both are cut 4 inches from the cat so it should be the same length. Do you have any pics of yours I may be able to use as reference?
No, I don't have any pics sorry...80 is not near edison and he charged my 100 to fab and install.
[quote author=saluteTOme link=topic=68909.msg1193390#msg1193390 date=1170893030]
No, I don't have any pics sorry...80 is not near edison and he charged my 100 to fab and install.
[/quote]

yeah I figured that, is it towards the tpke?
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top