Mazda3 Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
15,107 Posts
[quote author=kspec link=topic=68501.msg1184506#msg1184506 date=1170513653]
[quote author=Retrax link=topic=68501.msg1184314#msg1184314 date=1170483770]
Hey Kspec, does your lip interfere with the ability to remove your front bumper? I am curios if it gets in the way, especially inside the front of the wheel well?
[/quote]

i got no idea, i dunno how to take off the front bumper, and never tried. But you could take off the front lip if you needed to. just screws on the side inside wheel well, and some 3m double sided tape or adhesive in the fronts.
[/quote]

I don't think this would affect taking off the front bumper at all.
 

· Registered
Joined
·
15,107 Posts
[quote author=biped link=topic=68501.msg1184523#msg1184523 date=1170514776]
the hatch one should fit flawlessly. this one, i'm not surprised if it has tiny gaps that, really, only the driver is going to notice. any body shop would probably be able to touch it up if you're getting it painted / fitted there as well.

people are quick to criticize but this one looks very nice, especially since nobody else makes it.

all of ssg's products are fiberglass, which is why i think i might skip the lip. i'd need some abs plastic, not something that will likely crack with a bad scrape... and they happen.
[/quote]

Nothing sucks more than pulling into a parking spot with a curb and pushing the lip up and over the curb... :bitching: I've never done this before, but I've come close. Seeing as this is fiberglass, if this were to happen, you could pretty much count on having a damaged lip.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top