Mazda3 Forums banner
41 - 60 of 162 Posts

· Registered
Joined
·
924 Posts
[quote author=SPACE WRANGLER link=topic=135118.msg3021208#msg3021208 date=1238169086]
[quote author=Lincoln link=topic=135118.msg3019598#msg3019598 date=1238106727]
THey are going to rub like hell in the back because they do now with the +50 offset on my current wheels and the new ones are +40. I noticed the other day that it must have caught the fender lip on my tire and it pull about a 2" section outwards! I'm just going to cut the lip off with my rotary tool and paint the bare edge.
[/quote]
Well my track 16's did the same thing and I ghetto fender rolled it (warmed the paint, rubber hose slit in half and put over the edge and then used pliers). Watch out with the sharp lip, may slice the tire .
[/quote]

I hate to do it but I think that I am going to put my Toyos on these rims because they are 225/40 and my Dunlops are 235/40. When I get the extra money I will buy two 225/40 dunlops and stagger my tires with the smaller in the rear. I just don't know what else to do if they rub now and the new wheels are 10mm closer to the fender?
 

· Registered
Joined
·
619 Posts
[quote author=Lincoln link=topic=135118.msg3021220#msg3021220 date=1238169605]
[quote author=SPACE WRANGLER link=topic=135118.msg3021208#msg3021208 date=1238169086]
[quote author=Lincoln link=topic=135118.msg3019598#msg3019598 date=1238106727]
THey are going to rub like hell in the back because they do now with the +50 offset on my current wheels and the new ones are +40. I noticed the other day that it must have caught the fender lip on my tire and it pull about a 2" section outwards! I'm just going to cut the lip off with my rotary tool and paint the bare edge.
[/quote]
Well my track 16's did the same thing and I ghetto fender rolled it (warmed the paint, rubber hose slit in half and put over the edge and then used pliers). Watch out with the sharp lip, may slice the tire .
[/quote]

I hate to do it but I think that I am going to put my Toyos on these rims because they are 225/40 and my Dunlops are 235/40. When I get the extra money I will buy two 225/40 dunlops and stagger my tires with the smaller in the rear. I just don't know what else to do if they rub now and the new wheels are 10mm closer to the fender?
[/quote]
You have to get those on for the Surgeline meet!
 

· Registered
Joined
·
1,087 Posts
[quote author=SPACE WRANGLER link=topic=135118.msg3019301#msg3019301 date=1238099666]
[quote author=Lincoln link=topic=135118.msg3018628#msg3018628 date=1238080575]
I don't think that it was me.
I saw a Speed6 a few days ago when I was on my way to buy Josh's Mazdaspeed RX8 wheels!!! :shock: Oh yes, I finally got my dream wheels!!!
[/quote]
YOU SUCK !
[/quote]

x 10,0000
 

· Registered
Joined
·
238 Posts
Spotted two Speed3's today. Well, I guess it was just one cuz I saw Travis's Speed at CS when I was talking to Derrick. Doesnt count. :lol:
Comming back home on 205, I spotted a Silver Speed3 getting on from Airport way. Was debadged, and had a real nice set of Gold rims that just set off the paint job.


Whoever you where, you have great taste in color combo's. :)
 

· Registered
Joined
·
195 Posts
Saw a Metro gray Speed3 the other day while I was at the Moto Pizza on 82nd they were coming out of the skate park across the street from me.
 

· Registered
Joined
·
924 Posts
I saw a tinted black mica speed3 with glossy black mesh wheels yesterday about 6:45pm. The guy was at the corner of Broadway and Grand talking on his cell phone. I drove right in front of him and nearly came to a complete stop in front of him while I was rolling down my window looking right into his face and he did not even acknowledge me!!! He looked like a tool anyways but he had a nice car!
 

· Registered
Joined
·
619 Posts
[quote author=Lincoln link=topic=135118.msg3036637#msg3036637 date=1238772526]
I saw a tinted black mica speed3 with glossy black mesh wheels yesterday about 6:45pm. The guy was at the corner of Broadway and Grand talking on his cell phone. I drove right in front of him and nearly came to a complete stop in front of him while I was rolling down my window looking right into his face and he did not even acknowledge me!!! He looked like a tool anyways but he had a nice car!
[/quote]
Hmm, I wonder if that's the same guy who ignored me last week on SE Powell. Some people are in their own world and/or it's just a car to them. I've always been the type to try and tell someone "nice car". Only gas station attendants notice my MS6. Portland sucks. :p
 

· Registered
Joined
·
182 Posts
Wed I think it was I saw a grey speed 3 on lombard heading towards the freeway passing 76 station around 8:30AM & today I saw a grey speed 6 on 185th around 11AM. oh & a regular white hatch 3 w/ gold wheels tried to race me today on walker... =} their car looked nice but umm.. c'mon dude, you regular 3 vs ms3? Why is it only regular 3's want to play? I never run into any speeds who acknoledge me. Sad-
 

· Registered
Joined
·
619 Posts
[quote author=Cherylynn link=topic=135118.msg3037665#msg3037665 date=1238805655]
Wed I think it was I saw a grey speed 3 on lombard heading towards the freeway passing 76 station around 8:30AM & today I saw a grey speed 6 on 185th around 11AM. oh & a regular white hatch 3 w/ gold wheels tried to race me today on walker... =} their car looked nice but umm.. c'mon dude, you regular 3 vs ms3? Why is it only regular 3's want to play? I never run into any speeds who acknoledge me. Sad-
[/quote]
I wonder if the Speed6 was one of the sales guys at Beaverton Nissan. If it is, it's actually his second MS6, as he flipped his first one on Skyline.
 

· Registered
Joined
·
859 Posts
i started commuting from hillsboro to salem and a few times I have seen a black hatch with black rims and chrome lip and yellow fogs on I5

also saw a darker blue (cosmic?) sedan in tanasbourne. it definitely had an intercooler. it didnt sound turboed (driving slow i guess) and it had stock exhaust. I don't know if it is techincally required to have larger exhaust with turbo but it seems to make sense. So I dont know what to make of that car.
 

· Registered
Joined
·
182 Posts
[quote author=ptriz21 link=topic=135118.msg3039643#msg3039643 date=1238910052]
i started commuting from hillsboro to salem and a few times I have seen a black hatch with black rims and chrome lip and yellow fogs on I5

also saw a darker blue (cosmic?) sedan in tanasbourne. it definitely had an intercooler. it didnt sound turboed (driving slow i guess) and it had stock exhaust. I don't know if it is techincally required to have larger exhaust with turbo but it seems to make sense. So I dont know what to make of that car.
[/quote]
Maybe they just had a fancy radiator..?
 

· Registered
Joined
·
2,293 Posts
[quote author=Snowspd3 link=topic=135118.msg3042609#msg3042609 date=1239054262]
Saw a white sedan with black wheels, red lip, this morning on cascade pkwy by IKEA. Nice clean car.
[/quote]

I saw that guy at a car show last year.
 

· Registered
Joined
·
924 Posts
[quote author=prmspen link=topic=135118.msg3076478#msg3076478 date=1240414539]
Yesterday I saw a black Speed 3 with tint on SW Terwilliger, waiting to turn left on to Barbur at about 5:15 PM. Anyone on here?
[/quote]

There are 2 cosmic blue speed3's within blocks of my house.
They are always just sitting in the street! What a waste!
 

· Registered
Joined
·
182 Posts
So Saturday night on 26 going into portland there was a silver MS3 w/ tinted windows who didnt want to play around-
& then also this weekend there were a silver, black & red MS3 on 158th. Ive never seen so many speeds in one weekend. Were a few black MS6s out and about too today.
 
41 - 60 of 162 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top