Mazda3 Forums banner
1 - 15 of 15 Posts

· Registered
Joined
·
924 Posts
[quote author=MS3MB link=topic=135118.msg2908352#msg2908352 date=1233642483]
saw a maroon speed3 driving in West Linn but I dont think he is on here cuz I havnt seen anyone else posting from West Linn
[/quote]

No such thing as a maroon speed3 unless it is custom painted. :dunno:

I see many speed3s all the time. It seems like most people that I notice with them do not mod them at all.
 

· Registered
Joined
·
924 Posts
I saw a silver Speed6 yesterday with BC plates on Russel St by MLK. I got next to him at the light and rolled down my window to tell him that he has a nice car. He revs his engine for me and then I rev my engine back at him and he replies "Yeah there it is!". As far as I could tell he had no mods so my car must have sounded bad ass to him?
 

· Registered
Joined
·
924 Posts
[quote author=SPACE WRANGLER link=topic=135118.msg3019301#msg3019301 date=1238099666]
[quote author=Lincoln link=topic=135118.msg3018628#msg3018628 date=1238080575]
I don't think that it was me.
I saw a Speed6 a few days ago when I was on my way to buy Josh's Mazdaspeed RX8 wheels!!! :shock: Oh yes, I finally got my dream wheels!!!
[/quote]
YOU SUCK !
[/quote]

How bad do I suck now? :p



Run away or I shall taunt you a second time!
 

· Registered
Joined
·
924 Posts
THey are going to rub like hell in the back because they do now with the +50 offset on my current wheels and the new ones are +40. I noticed the other day that it must have caught the fender lip on my tire and it pull about a 2" section outwards! I'm just going to cut the lip off with my rotary tool and paint the bare edge.
 

· Registered
Joined
·
924 Posts
[quote author=SPACE WRANGLER link=topic=135118.msg3021208#msg3021208 date=1238169086]
[quote author=Lincoln link=topic=135118.msg3019598#msg3019598 date=1238106727]
THey are going to rub like hell in the back because they do now with the +50 offset on my current wheels and the new ones are +40. I noticed the other day that it must have caught the fender lip on my tire and it pull about a 2" section outwards! I'm just going to cut the lip off with my rotary tool and paint the bare edge.
[/quote]
Well my track 16's did the same thing and I ghetto fender rolled it (warmed the paint, rubber hose slit in half and put over the edge and then used pliers). Watch out with the sharp lip, may slice the tire .
[/quote]

I hate to do it but I think that I am going to put my Toyos on these rims because they are 225/40 and my Dunlops are 235/40. When I get the extra money I will buy two 225/40 dunlops and stagger my tires with the smaller in the rear. I just don't know what else to do if they rub now and the new wheels are 10mm closer to the fender?
 

· Registered
Joined
·
924 Posts
I saw a tinted black mica speed3 with glossy black mesh wheels yesterday about 6:45pm. The guy was at the corner of Broadway and Grand talking on his cell phone. I drove right in front of him and nearly came to a complete stop in front of him while I was rolling down my window looking right into his face and he did not even acknowledge me!!! He looked like a tool anyways but he had a nice car!
 

· Registered
Joined
·
924 Posts
[quote author=prmspen link=topic=135118.msg3076478#msg3076478 date=1240414539]
Yesterday I saw a black Speed 3 with tint on SW Terwilliger, waiting to turn left on to Barbur at about 5:15 PM. Anyone on here?
[/quote]

There are 2 cosmic blue speed3's within blocks of my house.
They are always just sitting in the street! What a waste!
 

· Registered
Joined
·
924 Posts
[quote author=triplejumper18 link=topic=135118.msg3097363#msg3097363 date=1241205595]
Spotted a Red MS3 going up Taylors Ferry around noon as I was going down. The driver waived to me, so I waived back.
[/quote]

I told you that other speed owners would notice you now!
 

· Registered
Joined
·
924 Posts
[quote author=speed3rb link=topic=135118.msg3198987#msg3198987 date=1246034577]
Last saturday, I saw a black MS3 on 5 or 6 spoke black rims with their calipers painted red @ 11th & E Burnside at around 8-9pm. Looked real clean, makes me want to paint my calipers like my ol focus :)
[/quote]

That was me. My salon is at 11th and E Burnside. We were having our grand opening party. Was that your black Speed3 I saw parked up the street?
 

· Registered
Joined
·
924 Posts
That sounds like the same guy I saw on MLK Blvd last month. He thought that I was messing with him but I was just going fast through my favorite curves. I did not even realise that there was a speed6 in front of me? I kept wondering why he was trying so hard to keep up and then when I turned on my block I heard his SSQV.
 

· Registered
Joined
·
924 Posts
I saw a silver Speed6 yesterday that was lowered, tinted and had WA plates. I was on Sandy right at the 205 entrance at about 3pm. I hung my head out of my window and gave them the once over. They must have got on to 205 because I did not see them again?
 

· Registered
Joined
·
924 Posts
Followed a silver Speed3 GT, looked stock. I was behind him on SE Division and he saw me behind him as he was turning on to SE 12th and tried to take off faster than me, lol! I got next to him and he waved to me. He was a younger guy with brown hair and really big sideburns.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top