Mazda3 Forums banner
1 - 20 of 24 Posts

·
Registered
Joined
·
1,842 Posts
[quote author=aaronc7 link=topic=134933.msg2903206#msg2903206 date=1233444229]
FYI you need to enable 'beta" firmware downloads in the options in the AP updater program to get this right now
[/quote]

did u test ur car yet?? how much whp r u putting down aaronc7?
 

·
Registered
Joined
·
2,788 Posts
lol first run i had wheelspin in 3rd gear and it said i had something like 460whp lmao.

I did it again in 4th gear and it said 350. so yeah its reading high but then again this is BETA firmware and im not really sure what to put for weight of the car either
 

·
Registered
Joined
·
3,558 Posts
It says wheel hp. I put down 377 torque and 365 hp. I was going downhill on an onramp. It definately overestimates
 

·
Registered
Joined
·
1,842 Posts
damn...so this is how we get over 300whp.....LOL....
 

·
Registered
Joined
·
1,968 Posts
[quote author=dread link=topic=134933.msg2903533#msg2903533 date=1233457231]
It says wheel hp. I put down 377 torque and 365 hp. I was going downhill on an onramp. It definately overestimates
[/quote]

hehe i know right,
 

·
Registered
Joined
·
723 Posts
[quote author=aaronc7 link=topic=134933.msg2903381#msg2903381 date=1233452358]
lol first run i had wheelspin in 3rd gear and it said i had something like 460whp lmao.

I did it again in 4th gear and it said 350. so yeah its reading high but then again this is BETA firmware and im not really sure what to put for weight of the car either
[/quote]

when i've weighed at the track, the car was between 3200 and 3300lbs depending on how much fuel is in the car at the time, and whether or not the spare, jack, etc are in it. if you put in like 3800lbs, it would read way high, becaues it's thinking that the car is accellerating ~500lbs more than it actually is.
 

·
Registered
Joined
·
1,173 Posts
[quote author=Strizzo link=topic=134933.msg2908757#msg2908757 date=1233675030]
[quote author=aaronc7 link=topic=134933.msg2903381#msg2903381 date=1233452358]
lol first run i had wheelspin in 3rd gear and it said i had something like 460whp lmao.

I did it again in 4th gear and it said 350. so yeah its reading high but then again this is BETA firmware and im not really sure what to put for weight of the car either
[/quote]

when i've weighed at the track, the car was between 3200 and 3300lbs depending on how much fuel is in the car at the time, and whether or not the spare, jack, etc are in it. if you put in like 3800lbs, it would read way high, becaues it's thinking that the car is accellerating ~500lbs more than it actually is.
[/quote]

was that with you in it?
 

·
Registered
Joined
·
32 Posts
Well,
Last night my dyno was
355.2hp and 370.6ft lbs - 3300lbs; in 3rd gear; rpm start at 3000; rpm end at 6500
356.6hp and 368.4ft lbs - 3300lbs; in 3rd gear; rpm start at 3000; rpm end at 6500
660.1hp and 800.xft lbs - 3300lbs; in 4th gear; rpm start at 3000; rpm end at 6500 (cause I was going on/off boost/throttle on purpose just to see how outrageous the numbers would go

Oh no wheel spin, with TSC and DSC on.
 

·
Registered
Joined
·
153 Posts
Might not be accurate but atleast it looks like it's consistent on those 3rd gear runs ... good maybe to see if a mod did anything or not.
 

·
Registered
Joined
·
1,173 Posts
Very interesting...

My numbers for two runs.

Both runs done at 3,300 lbs...3rd gear...3500rpm-6000rpm

1. 350 hp 417 ft/lb
2. 359 hp 416 ft/lb

I'm curious to why my tq is SO much higher then everyone elses lol...lighter wheels?

mods in sig
 

·
Registered
Joined
·
994 Posts
Has anyone else experiences problems after updating to this beta?

I got the accessport and immediately updated to the beta. When I tried to datalog tho, it wouldn't do it.
 
1 - 20 of 24 Posts
Top