Mazda3 Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter · #1 ·
how do you think, will I be able to lower my car? for me looks like front rims are too wide
 

Attachments

·
Registered
Joined
·
31,083 Posts
looks like you will rub if you lower it much.
 

·
Registered
Joined
·
163 Posts
Look like you will rub but you can also adjust the camber a little if needed so that it wont...you will get a little bit better feedback if we know what the width and offset of your rims are and what size tire you are running?
 

·
Registered
Joined
·
115 Posts
Discussion Starter · #4 ·
[quote author=K2b84 link=topic=139833.msg3013757#msg3013757 date=1237902804]
Look like you will rub but you can also adjust the camber a little if needed so that it wont...you will get a little bit better feedback if we know what the width and offset of your rims are and what size tire you are running?
[/quote]
I dont remember what is offset, they dont sell wheels like this any more :lol: rims are 18/8j and tyres 225/40? :lol:
 

·
Registered
Joined
·
115 Posts
Discussion Starter · #6 ·
[quote author=danielj link=topic=139833.msg3014074#msg3014074 date=1237912259]
I can tell by looking that the offset is too low. You will rub with a drop.
[/quote]
Is there anything I could do?
 

·
Registered
Joined
·
16,618 Posts
[quote author=mindis link=topic=139833.msg3014884#msg3014884 date=1237934477]
[quote author=danielj link=topic=139833.msg3014074#msg3014074 date=1237912259]
I can tell by looking that the offset is too low. You will rub with a drop.
[/quote]
Is there anything I could do?
[/quote]

Replace your rims for some with a higher offset.
Do not drop
Change out more than springs (coilovers)
 

·
Registered
Joined
·
31,083 Posts
higher offset :p
 
1 - 10 of 10 Posts
Top