Hi-boost turbo kit reviews
1 - 20 of 30 Posts
no offense man but open your eyes.. there are people running them, selling them, cursing them, and enjoying them everywhere on here..
1) dont buy them direct.. yada yada the owners are shady blah blah
2) haltech is a pita to tune if youve never done standalones yada yada
3) quality is decent, yet pipes are crush bent for the most part blah blah
if you can find one used (2 are for sale used in the FS section) it might be a decent deal.. buying new i would not get one.
plenty of reviews to read going on that ^ info..
1) dont buy them direct.. yada yada the owners are shady blah blah
2) haltech is a pita to tune if youve never done standalones yada yada
3) quality is decent, yet pipes are crush bent for the most part blah blah
if you can find one used (2 are for sale used in the FS section) it might be a decent deal.. buying new i would not get one.
plenty of reviews to read going on that ^ info..
Joined
·
275 Posts
(I think he means Reactive) 
[quote author=johnkooistra link=topic=135066.msg2907510#msg2907510 date=1233624248]
(I think he means Reactive)
[/quote]
well there is a creative cpboost.com
CreativePerformance
Moped Rider
Total Posts: 43
Site Posts: 43
Transaction Count: (0)
Location:
Date Registered: February 01, 2007, 09:11:41 PM
Re: Creative Protege turbo kit... Idea of what the 3 kit will be like
« Reply #31 on: December 13, 2008, 12:34:11 AM » Quote
--------------------------------------------------------------------------------
I do have it ready to ship, is a complete kit without fuel management,
1- tubular header for ext WG
2- Mander bended DP, Dump pipe and presure pipes
3-tial BO or HKS secuencial or turbo smart
4-precision turbo IC
5-tial WG 38mm
6- T3/ t4 turbo for up to 480 whp
7-steel braided oil feed and return line with AN fittings
8- all hardware needed
9- 3 inch intake with air filter
10- etc...
And all for $3795
CPBoost.com, email or call
either of the kits from tri points creative performance and reactive is a good kit. creative has a great tubular manifold
(I think he means Reactive)
[/quote]
well there is a creative cpboost.com
CreativePerformance
Moped Rider
Total Posts: 43
Site Posts: 43
Transaction Count: (0)
Location:
Date Registered: February 01, 2007, 09:11:41 PM
Re: Creative Protege turbo kit... Idea of what the 3 kit will be like
« Reply #31 on: December 13, 2008, 12:34:11 AM » Quote
--------------------------------------------------------------------------------
I do have it ready to ship, is a complete kit without fuel management,
1- tubular header for ext WG
2- Mander bended DP, Dump pipe and presure pipes
3-tial BO or HKS secuencial or turbo smart
4-precision turbo IC
5-tial WG 38mm
6- T3/ t4 turbo for up to 480 whp
7-steel braided oil feed and return line with AN fittings
8- all hardware needed
9- 3 inch intake with air filter
10- etc...
And all for $3795
CPBoost.com, email or call
either of the kits from tri points creative performance and reactive is a good kit. creative has a great tubular manifold
Joined
·
275 Posts
My mistake...I haven't heard much about that kit...
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
Joined
·
52 Posts
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
yes i forgot all about that. i had the hiboost wiring harness and i trashed it because they sent me the wrong one and it was a pos. Wires were crossed and it was just made by very low quality. i had a huge mess with this wiring kit. Get in contact with haltech and order a wiring harness from them. it is what i did. it is a high quality harness. as for the tach driver i am running a ford racing one but i am sure you could get the msd to work with some modificatioon. i would search first though and see if you can find the ford racing one.
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
yes i forgot all about that. i had the hiboost wiring harness and i trashed it because they sent me the wrong one and it was a pos. Wires were crossed and it was just made by very low quality. i had a huge mess with this wiring kit. Get in contact with haltech and order a wiring harness from them. it is what i did. it is a high quality harness. as for the tach driver i am running a ford racing one but i am sure you could get the msd to work with some modificatioon. i would search first though and see if you can find the ford racing one.
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[quote author=*txmica3* link=topic=135066.msg2908988#msg2908988 date=1233680973]
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
i found the tach driver from ford racing idk if this will work on not. just came across it and it may help you out. not too bad of a price either
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=5454
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
i found the tach driver from ford racing idk if this will work on not. just came across it and it may help you out. not too bad of a price either
http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=5454
Joined
·
4,003 Posts
It seems the OP has made quite a few threads regarding turbo kits. If you just spend an hour or two in the boost section you will find everything you need. The Hiboost/TBK Performance has pretty much been discussed to death. Everyone knows they are a shady company and only two people had success with them, Jake and Aminzer. And what do ya know, both of these guys lived in Miami, where TBK Performance was located. Instead of asking dumb questions about a turbo company that doesn't technically exist for the Mazda world anymore; look into getting a turbo from Reactive Racing, Tri-Point, or F2.
[quote author=LuisDC link=topic=135066.msg2909449#msg2909449 date=1233689009]
Damn that a lot of work to install a hi-boost kit on my car lol
[/quote]
well if you need any help with the kit if you do decide to go with it just pm me. i did my install myself so i ll help out what i can
Damn that a lot of work to install a hi-boost kit on my car lol
[/quote]
well if you need any help with the kit if you do decide to go with it just pm me. i did my install myself so i ll help out what i can
[quote author=*txmica3* link=topic=135066.msg2908988#msg2908988 date=1233680973]
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
Don't know how but my car is a 2004 has with a MSD tach driver it works as far as I know
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
Don't know how but my car is a 2004 has with a MSD tach driver it works as far as I know
[quote author=M3-S link=topic=135066.msg2954778#msg2954778 date=1235360777]
[quote author=*txmica3* link=topic=135066.msg2908988#msg2908988 date=1233680973]
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
Don't know how but my car is a 2004 has with a MSD tach driver it works as far as I know
[/quote]
what ecu are you using? i would LOVE to know how you did it, since we tried for 3 days straight on the phone with dee, msd, haltech, shop owners, enthusiasts and nobody could get it to work with the haltech on my 04
[quote author=*txmica3* link=topic=135066.msg2908988#msg2908988 date=1233680973]
[quote author=Millionbucks link=topic=135066.msg2908588#msg2908588 date=1233670366]
[quote author=jesusm3 link=topic=135066.msg2908097#msg2908097 date=1233635880]
[quote author=LuisDC link=topic=135066.msg2907330#msg2907330 date=1233620110]
There is actualy one for sale. I am hesistant to buy cuase it tuned for an 04 not an 2007 and no injectors
[/quote]
all you will have to do is go and get injectors and go to a shop to properly tune the haltech for your car. its not too bad.
[/quote]
The wiring and wiring harness for the haltech F10x is different for a 2004-2005 then it is on a 2006+. Also the 2004-2005 has to use the ford racing tach driver where the 2006+ uses an MSD. Can't remember the exact differences cause I have never dealt with an 06+ but there is deffinatly differences.
[/quote]
difference is the number of teeth on the crank sensor or some such nonsense that shouldnt have been changed in the first place :lol:
we tried for days and days on the phone with dee and msd themselves to get the msd to work on my 04 and it will not, trust me. car will start but thats it. start and die, start and die.
[/quote]
Don't know how but my car is a 2004 has with a MSD tach driver it works as far as I know
[/quote]
what ecu are you using? i would LOVE to know how you did it, since we tried for 3 days straight on the phone with dee, msd, haltech, shop owners, enthusiasts and nobody could get it to work with the haltech on my 04
1 - 20 of 30 Posts
Join the discussion
Join now to ask and comment!