Mazda3 Forums banner
1 - 20 of 245 Posts

·
Registered
Joined
·
913 Posts
Discussion Starter · #1 ·
Here is the deal. Retail on these kits are usually around $220-$230+shipping. I am doing the Mazda 3 Kit for $205 and the Mazdaspeed 3 Kit for $210. Both prices include shipping. I need at least 6 kits total, I will run this for 2-3 weeks. Once the GB is over I will expect payments and you will receive a link though PM to pay.

Canada will be $225 Shipped

Mazda 3 is 5545.140 1.4"F & 1.2"R
Mazdaspeed 3 is 5549.140 0.8"F & 0.7R

Here are the links to pay, I will accept payments though Sunday the 15th. One week from today, all payments need to be received by midnight on the 15th. If I do not have at least 6 people paid then all payments will be refunded. When paying please include your forum name and if it is to canada please include which kit you want in the notes section.



Thank You
TI Motorsports

1st Round Eibach Pro-Kit GB

Mazda 3
1. StUpId8000 - PAID
2. T-Time - PAID
3. Silver06 - PAID
4. Ozracin - PAID
5. asbal88 - PAID
6. whatsyourpoison - PAID

Mazdaspeed 3
1.peeaanuut - PAID
2.sammifan - PAID
3.Jessman - PAID
4.thapr3dat0r - PAID

2nd Round Eibach Pro-Kit GB

Mazda 3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Mazdaspeed 3
1.
2.
3.
4.
5.



 

·
Registered
Joined
·
533 Posts
ok, thats it. Im gonna sell my stock wheels to get these since I have been wanting them for quite some time.

Put me down for an MS3 set pending getting 6 people.
 

·
Registered
Joined
·
913 Posts
Discussion Starter · #7 ·
[quote author=LuXuEuX link=topic=138034.msg2976857#msg2976857 date=1236227415]
Do you carry road magnet springs for the great price?? I prefer a stiffer spring rate!!
[/quote]

I will PM you tomorrow with a price. Not sure if I can match this but I will have a PM sent by end of tomorrow!

[quote author=LazyJoeJr link=topic=138034.msg2976866#msg2976866 date=1236227737]
I might be in for a set (regular 3 hatch).

I gotta call around and see if I can find a local place for install...
[/quote]
Sounds good, Install is very easy with some simple hand tools. I did mine in about 2 hrs with no air tools and floor jacks. If you change your mind please tell me.

Thanks
 

·
Registered
Joined
·
1,591 Posts
i didn't know there's a difference between the speed and the reg 3. i may be interested.... can you get me some koni yellows? im 75% sure i want yellows
 

·
Registered
Joined
·
346 Posts

·
Registered
Joined
·
757 Posts
you have the best timing. I was going to be getting a set in a few days

Mazda 3
1. StUpId8000
2.
3.

Mazdaspeed 3
1.peeaanuut
2.
3.
 

·
Registered
Joined
·
554 Posts
Whats better between Coilovers and Springs? I heard that if we ought to change the srpings we would have to change the shocks later on which would evntaully costs the same price...can someone please help me into choosing whats best?
 

·
Registered
Joined
·
1,591 Posts
some people have said they needed the camber arm for the pro- kit is this true? or can it be adjusted enough with the factory arm?
 

·
Registered
Joined
·
913 Posts
Discussion Starter · #16 ·
Should be ok with factory arm but an adjustable is always nice. I have them on my site.

This GB Might end next weekend so the 15th would be the last day.

BTW for everyone. Please check my site these next few days. Like I said I have big plans jumping off. Tonight in the past 6hrs or so I have added over 120 new products.

Mazda 3
1. StUpId8000
2.
3.

Mazdaspeed 3
1.peeaanuut
2.
3.

Lazy joe please add yourself to the list.
 

·
Registered
Joined
·
913 Posts
Discussion Starter · #17 ·
[quote author=plowshare link=topic=138034.msg2977063#msg2977063 date=1236239486]
Whats better between Coilovers and Springs? I heard that if we ought to change the srpings we would have to change the shocks later on which would evntaully costs the same price...can someone please help me into choosing whats best?
[/quote]

This is a very debatable topic, Some say that coils ride harder then spring and shock, some say the its better to get the adjustable ride height. Some say springs because you can save up for a bit longer before you would need shocks. Its all you decision. However I prefer these springs with some Koni Yellows or as far as coils either Teins or BC's.

[quote author=LuXuEuX link=topic=138034.msg2976857#msg2976857 date=1236227415]
Do you carry road magnet springs for the great price?? I prefer a stiffer spring rate!!
[/quote]

PM Sent
 

·
Registered
Joined
·
1,591 Posts
[quote author=Wildisme02 link=topic=138034.msg2977086#msg2977086 date=1236242740]
Should be ok with factory arm but an adjustable is always nice. I have them on my site.

This GB Might end next weekend so the 15th would be the last day.

BTW for everyone. Please check my site these next few days. Like I said I have big plans jumping off. Tonight in the past 6hrs or so I have added over 120 new products.
[/quote]

cool i think ill wait to get the arm to see if it can be aligned without it.
i've been looking on your site for liek a hour lol
 

·
Registered
Joined
·
913 Posts
Discussion Starter · #19 ·
[quote author=T-time link=topic=138034.msg2977091#msg2977091 date=1236243584]
[quote author=Wildisme02 link=topic=138034.msg2977086#msg2977086 date=1236242740]
Should be ok with factory arm but an adjustable is always nice. I have them on my site.

This GB Might end next weekend so the 15th would be the last day.

BTW for everyone. Please check my site these next few days. Like I said I have big plans jumping off. Tonight in the past 6hrs or so I have added over 120 new products.
[/quote]

cool i think ill wait to get the arm to see if it can be aligned without it.
i've been looking on your site for liek a hour lol
[/quote]

I am aiming to be the one stop shop for the Mazda 3 Mazdaspeed 3. I now have over 160 products on my site and I would say 150 are for this car alone!
 

·
Registered
Joined
·
2,087 Posts
I might join, been looking to get these for a while now.
 
1 - 20 of 245 Posts
Top