FS: oem Mazdaspeed3 MS3 sway bars and springs - SOLD
- Status
1 - 20 of 26 Posts
Joined
·
990 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
Will the front sway fit on an 04 sedan without modification?
Will the front sway fit on an 04 sedan without modification?
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
Yep, the front sway bolts right in.
The rear sway requires two spacers to take up the slop between the larger 12mm bolt holes on the sway and the 10mm bolts on the endlinks. For '04 to '06 models, the bushing stops on the rear bar also need to be slid over a little.
Yep, the front sway bolts right in.
The rear sway requires two spacers to take up the slop between the larger 12mm bolt holes on the sway and the 10mm bolts on the endlinks. For '04 to '06 models, the bushing stops on the rear bar also need to be slid over a little.
Joined
·
2,910 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
Dude, 180 is a bit much but a clean and great set of sways and springs. GL with the sale.
Free bump
Dude, 180 is a bit much but a clean and great set of sways and springs. GL with the sale.
Free bump
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
[quote author=AxelaCubed link=topic=136293.msg2937467#msg2937467 date=1234663207]
Dude, 180 is a bit much but a clean and great set of sways and springs. GL with the sale.
[/quote]
Just to clarify, $180 is for both bars.
[quote author=AxelaCubed link=topic=136293.msg2937467#msg2937467 date=1234663207]
Dude, 180 is a bit much but a clean and great set of sways and springs. GL with the sale.
[/quote]
Just to clarify, $180 is for both bars.
Joined
·
761 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
pretty good deal. wish i had the money for em.
pretty good deal. wish i had the money for em.
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
[quote author=borisK link=topic=136293.msg2970450#msg2970450 date=1236008659]
will the springs lower a sedan?? and approximately how much, thanks.
[/quote]
Results vary - general consensus is 0.5" all around on a 2.3, perhaps less up front on a 2.0. Definitely a performance upgrade for both.
[quote author=borisK link=topic=136293.msg2970450#msg2970450 date=1236008659]
will the springs lower a sedan?? and approximately how much, thanks.
[/quote]
Results vary - general consensus is 0.5" all around on a 2.3, perhaps less up front on a 2.0. Definitely a performance upgrade for both.
Joined
·
2,910 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
[quote author=boomhauer link=topic=136293.msg2970531#msg2970531 date=1236010611]
[quote author=borisK link=topic=136293.msg2970450#msg2970450 date=1236008659]
will the springs lower a sedan?? and approximately how much, thanks.
[/quote]
Results vary - general consensus is 0.5" all around on a 2.3, perhaps less up front on a 2.0. Definitely a performance upgrade for both.
[/quote]
+1
Definite upgrade to handling. I can assure that.
[quote author=boomhauer link=topic=136293.msg2970531#msg2970531 date=1236010611]
[quote author=borisK link=topic=136293.msg2970450#msg2970450 date=1236008659]
will the springs lower a sedan?? and approximately how much, thanks.
[/quote]
Results vary - general consensus is 0.5" all around on a 2.3, perhaps less up front on a 2.0. Definitely a performance upgrade for both.
[/quote]
+1
Definite upgrade to handling. I can assure that.
Joined
·
123 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
I will take the springs.
How much shipped to 11518 NY?
How many miles when you took them off?
I will take the springs.
How much shipped to 11518 NY?
How many miles when you took them off?
Joined
·
1,039 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
i will take the rear sway if you know somewhere i can find the spacers...
i will take the rear sway if you know somewhere i can find the spacers...
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
[quote author=goggles1226 link=topic=136293.msg2971349#msg2971349 date=1236032024]
i will take the rear sway if you know somewhere i can find the spacers...
[/quote]
Sure, that's easy!
I have used these: http://www.thelongboardstore.com/bearings/bearing-spacers/10mm-x-10mm-bearing-spacers/ These are inexpensive aluminum spacers, but require some work since the OD is closer to 13mm, so you'll have to turn them down. A lathe would make quick work of it; it was a little slow going for me while filing/sanding with it chucked in my drill press.
Others have used nylon spacers (also slightly oversized) pulled from the parts bin at HD.
For correct size steel spacers, look up cwp_sedan.
[quote author=goggles1226 link=topic=136293.msg2971349#msg2971349 date=1236032024]
i will take the rear sway if you know somewhere i can find the spacers...
[/quote]
Sure, that's easy!
I have used these: http://www.thelongboardstore.com/bearings/bearing-spacers/10mm-x-10mm-bearing-spacers/ These are inexpensive aluminum spacers, but require some work since the OD is closer to 13mm, so you'll have to turn them down. A lathe would make quick work of it; it was a little slow going for me while filing/sanding with it chucked in my drill press.
Others have used nylon spacers (also slightly oversized) pulled from the parts bin at HD.
For correct size steel spacers, look up cwp_sedan.
Joined
·
761 Posts
Re: FS: oem Mazdaspeed3 MS3 sway bars and springs
hahah. that is creative!
hahah. that is creative!
1 - 20 of 26 Posts
- Status
Join the discussion
