Mazda3 Forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
7,996 Posts
Discussion Starter #1
Memphis 16 PRD500.1 Power Reference 500 Watt Mono Amplifer SOLD



MEMPHIS 10" Power Reference Subwoofer, with freeee boxxxx!
Put some bump in your trunk!! $50 + SHIPPING If you don't want the box, thats cool too.. ill just make a bonfire with it



# 10" Component Subwoofer
# RMS Power Handling: 200 Watts
# Peak power Handling: 400 Watts
# Sensitivity: 97 dB
# Custom M Logo Steel Basket with Black Pearl Finish
# Black Pearl Finish Injection Molded Cone
# Polyprene Double-Roll Surround
# Proprietary Heat Exchange T-Yoke
# Dual Flat Spiders with Graduated Rolls
# Vented Spider Spacer
# Dual 4 Ohms


I ACCEPT PAYPAL (+4%), CASH, MONEY ORDERS! Local pickup is always welcomed!
Any questions please ASK!
 

·
Registered
Joined
·
618 Posts
I don't need these, but I will vouch for Memphis gear. It was my car audio of choice until I discovered Hertz/Audison... But Memphis stuff really booms, and has good SQ to boot.
 

·
Registered
Joined
·
4,775 Posts
May have a definite interest in that amplifier. If you can get me some more stats on it I may be so inclined to take it off of your hands.
 

·
Registered
Joined
·
7,795 Posts
I can vouch for Memphis too. I have 2 10 inch Memphis PR subs and amp and man does it hit hard :shock:
 

·
Registered
Joined
·
7,996 Posts
Discussion Starter #5
[quote author=daustin link=topic=136260.msg2936150#msg2936150 date=1234591622]
May have a definite interest in that amplifier. If you can get me some more stats on it I may be so inclined to take it off of your hands.
[/quote]

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=374

Plenty of affordable power to drive 1-3 subwoofers.
The optional wired remote gain control (16-PRDGC) allows you to control the subwoofer volume from the comfort of the drivers seat.

# Class-D Monoblock Amplifier
# RMS Power Ratings:
# RMS Power (1 ohm) 500 watts x 1 chan.
# RMS Power (2 ohms) 300 watts x 1 chan.
# RMS Power (4 ohms) 150 watts x 1 chan.
# Peak Power Output 1000 watts
# Black Textured Finish Heatsink with Black Chrome Trim and Injection Molded End Plates
# Fully Variable Low-Pass Crossover (50 - 350 Hz)
# Power and Protection LEDs
# Adjustable Gain Control
# 0 - 18 dB Bass Boost
# Subsonic Filter: 20 - 50 Hz
# Low Level Input
# RCA Outputs: 1 Pair
# Optional Remote Gain Control
# PWM MOSFET Power Supply
# Platinum Finish Terminals
# Dimensions: 9.5" W x 2" H x 10.75" L
# Number of Channels 1 - Mono
# Min. Impedance Unbridged 1 Ohm
# THD @ Rated RMS Power 0.05%
# Amp Preamp Outputs Yes - 1 Pair
# Built-in Crossover LPF(50 - 350 Hz), Subsonic(20 - 50 Hz)
# Signal-to-Noise Ratio 90 dB
# Bass Boost 0 - 18 dB
# Fuse Rating 30A x 2
 

·
Registered
Joined
·
4,775 Posts
Yea I would most definitely like to take this off of your hands. Do you have an idea what a shipping quote is going to look like to 17022? Also, do you have the bass remote for it?
 

·
Registered
Joined
·
7,996 Posts
Discussion Starter #7
probably about $15-18 to ship, its a pretty heavy piece but not overly large.
Sorry I do not have a remote, my head unit allowed me control all that.
 

·
Registered
Joined
·
4,775 Posts
[quote author=PirateKitty link=topic=136260.msg2936521#msg2936521 date=1234625983]
probably about $15-18 to ship, its a pretty heavy piece but not overly large.
Sorry I do not have a remote, my head unit allowed me control all that.
[/quote]

Well, if you can get me a shipping quote and junk I can do what I can to take this off of your hands.
 

·
Registered
Joined
·
4,775 Posts
[quote author=PirateKitty link=topic=136260.msg2940768#msg2940768 date=1234820194]
^ sure thing. im gonna box it up and see about the quote, ill get back to you asap!
[/quote]

Sweet. Sounds good.
 

·
Registered
Joined
·
4,775 Posts
Payment sent via PayPal. Done.

If you can send a tracking number, that would be awesome.
 
1 - 14 of 14 Posts
Top