Mazda3 Forums banner
1 - 7 of 7 Posts

· Registered
Joined
·
70 Posts
AEM INTAKE

I HAVE IT !

I have the intake in my hot little hands as we speak. I have an inside guy that shipped it to me last week. I got it in polished. So it is available. Email e and i will send you a DYNO graph of the Touqe and HP ( Before and after).

[email protected]
 

· Registered
Joined
·
70 Posts
No1 Reason... Time! It is a very time consuming install. Easy! But time consuming! No2...I only have 400 miles on it and want to make sure that there are no other "Problems" yet. Dont want to put on the OEM sytem just to take it into the dealership for service after installing the intake. My friend at AEM told me that reinstalliong the stock system is a real pain! Plus the AEM Intake is not C.A.R.B. legal...YET! So until it is California legal and i am confident the are no potential "Engine Check Lights".. it will remain in my bedroom and in the box. I figure about 2,000 miles and i will put it on. AEM want me to bring it in to have it re-Dyno'd to see what numbers it puts out on a "Broken in Car". They used a car with only 15 miles on it when doing the R&D.

Anyone interested in seeing the DYNO sheets for a 3s 2.3L can email me at [email protected], and i will email them to you. These Dyno sheets are from AEM directly.
 

· Registered
Joined
·
70 Posts
OK! Raitchison is right. They did pull one off the line for me. I lent them my truck 3 times overthe course of two months. They had it for days at a time. They offered to get me a rental car each time, but i made arrangements to have a car. They offered to fill my 35 gallon tank, but it was full each time i gave it to them. They offerd to wash it, but i have it detailed every week. I could have sucked them for at least $2,000.00 in services, but i didnt. So when i cam time to get an intake, they stepped up to the plate. Special treatment...YOU BET! Thats why AEM is a TOP NOTCH operation! They noticed how i went out of my way for them and that i did not take advantage of them. So they did the right think! 5 star as far as i am concerned. Professional, courtious, and honest.

The M3s Intake is currently in production. They will not release it untill they 1. They have a sufficient run made ( I guess around 10,000 units and 2. They have enough orders from retailers and wholesalers. ( Not direct to the public).

To date they might have a dozen or so requests from private individuals for the intake. Thats not enough to release it. It is a business after all. As soon as they have enough they will ship it out to all the retailers all at once. So it is a level playing field and none of the retailers are complaining that "They got thiers be for me!". I think INJEN would do the same thing. It's just good business sence.

AEM ran the intake on the M3s for long periods of time under different conditions with never seeing a CEL. Have confidence in the high standards, quality and workmanship at AEM. I was taken for a full tour of the production floor before leaving them my truck. I WAS IMPRESSED! Talk about clean. I would expect a factory to be cluttered. NOPE!

Be patient and get the right part for your car. Settle and you'll whish you hadn't.
 

· Registered
Joined
·
70 Posts
Any engine guy (or gal) will tell you that engines do two things, inhale and exhale ( intake and exhaust). So in choosing..choose the exhaust first. No sence in getting it to take in more, if it cant get it out.
 

· Registered
Joined
·
70 Posts
There ya go! That means you'll need to give it a few weeks before you can actually order it. It will take a week or two for all the retailers to get them, inventory them, issue internal SKU's and then get them ready for shipping to consumers. Most retailers might accept pre/backorders at this point. But only buy from a reputable retailer! NOT E-BAY!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top