Mazda3 Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
Dyno'd my car today, was hoping for 120 at the most but I surprised myself!

Quick stats - 133 whp, 13-14% drivetrain loss, i calculated something like 117 lb-ft of peak torque (135 tq - 14%)



 

·
Registered
Joined
·
695 Posts
I assume manual tranny, due to the low loss?
 

·
Registered
Joined
·
1,008 Posts
[quote author=WingZero_ link=topic=154384.msg3297035#msg3297035 date=1251265537]
I assume manual tranny, due to the low loss?
[/quote]

it was also a dynojet
 

·
Registered
Joined
·
16,618 Posts
Wow, that's great for a stock 2.0 ATX.

At our last dyno meet a guy with a last gen 2.0 ATX only put out 105.
 

·
Registered
Joined
·
695 Posts
Wow that is pretty freaking good for an ATX. Congrats.
 

·
Registered
Joined
·
60 Posts
Do you have a torque graph picture too?


These results almost seem crazy to me, seeing as how corksport got 135whp on an mtx car AFTER adding their SRI and exhaust. I mean I hope these results are true (since I have a 2010 3 with the 2.0 :D ) but that's crazy high.


EDIT: Damn, I just noticed it's based on MPH and not rpm. Don't suppose they gave you an rpm-based one, eh? I assume 100mph is 6500~ rpm? Is that right?
 

·
Registered
Joined
·
41 Posts
oh what i thought the 2.0 stock was @ 123Hp /118 torque thats what corksport said for the stock results and after you add the corksport exhaust + intake its 135hp / 123torque
 

·
Registered
Joined
·
695 Posts
Vendors typically inflate their numbers for sales. And every dyno is different too.
 

·
Registered
Joined
·
17 Posts
2012 MZR

I have a 2012 Mazda3 2.0 with CS SRI and CS catback exhaust. Before tune I was only getting 128 hp / 119 tq after tune im getting 146 hp / 132 tq. Next ill be adding a MSDS head/downpipe which should give me a nice bump. Also don't know how accurate the dyno is.
 

·
Registered
Joined
·
486 Posts
I have a 2012 Mazda3 2.0 with CS SRI and CS catback exhaust. Before tune I was only getting 128 hp / 119 tq after tune im getting 146 hp / 132 tq. Next ill be adding a MSDS head/downpipe which should give me a nice bump. Also don't know how accurate the dyno is.
Wondering what tune you used? Not seeing any sheet or pix yet, on the way?:smiling:

Downpipe?
 

·
Registered
Joined
·
153 Posts
Very nice numbers bro! We dyno end my 2.5 and I made like 168 ish hp and 172 torque .. After my corksport Sri and catback .. Pretty much what mazda said it was from the factory off the crank . Just ordered the dynotronics tune.. Hoping to bump it up to 180whp but those are high hopes I think
 

·
Registered
Joined
·
153 Posts
Oh and where are you located? Cuz I dunno how much elevation has to do with ur numbers.. Just curious
 

·
Registered
Joined
·
153 Posts
Haha I'm shooting for the stars here... I know I could just get a turbo and push 10psi with reground cams and ferra valves ect and make like 230ish wheel no prob but I can't seem to bring myself to rape my baby haha . I wish there was a bolt on way to hit 200whp .. That's all this car would need IMO ... Sigh .... I still love my car though .. Makes me smile every time I drive it
 
1 - 16 of 16 Posts
Top