Mazda3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Suspension / Brakes This post had mostly the exact same symptoms. Originally I thought it was my rotors rubbing on the pads. My rotors were warped and pads were below 2mm so I replaced the lot. Issue persists. I cracked a rim and decided to change all...
  2. Stock Issues
    I have a 2010 mazda 3 2.0L with a refurbished tcm I just installed. I only took it for a test drive around my neighborhood but when I moved it into manual mode I could only shift between 1-3 and unable to get into fourth gear. not sure if im able to get into fourth gear in automatic mode
  3. Suspension / Brakes
    I have read Flatlander's (2012) post. Unless I missed it it does not specify model year. The workshop manual I have is for 2010 Mazdaspeed 3 and Mazda 3 and it says just to start at the furthest away wheel from the MC. So I'm trying to confirm that the my car has the diagonal system or the...
  4. Powertrain 2004-2009 Mazda3
    Hi I’m new to nodding / doing cars up I have a manual Mazda 3 maxxsport 2008, can anyone gimme some kits, mods I should do for the engine, I want to turbo it I got about 5 k to spend I don’t know if I should buy a turbo kit online and get it done at a specialty store and get a cat back exhaust...
  5. Stock Issues
    I bought a cheap 2008 Mazda 3 sedan, and I use it as a winter car. I bought it cheap because the car does not have heat and tends to overheat. When I press on the gas the engine temp gauge raises but it goes down after a certain time when I'm not pressing on the gas. Something also makes a...
  6. Mazda3 (Axela)
    Hello World. I just changed valve cover gasket, pcv, my Mazda 3 2005 2.0 still has cylinders full of oil. What would be the problem with the motor?
  7. Mazda3 (Axela)
    Hey i was think in making my 2.0l bk neo sport quick. is it possible to fit a 6speed transmission from a sp23 or mps into the 2.0l? And if it does has anyone done it and felt a difference. also i would like to know what have you guys done to a 2.0l to make it perform better and has power.
  8. Powertrain 2014+ Mazda3
    Got a 2014 Mazda 3 SkyActiv 2L recently and the solenoid in the high pressure fuel pump is making a significant clicking noise. I've checked my Fuel rail pressure with my OBD scanner, which indicates around 3.1Mpa (the recommended minimum is 3.0Mpa according to the service manual). I've also...
  9. Mazda3 (Axela)
    Hello! I know my question is probably stupid, but I just bought mazda 3(version is in the title) and I think there is something wrong with how the engine works now. When I bought it, it worked just fine, but now IT is louder and its shaking much more. Also i have noticed some vibration while...
  10. Modifications
    I just finished doing a swap on mazda 3 from a 2005 2.3 to 2004 2.0. Used the 2.3 wiring harness, computer and all the sensors everything connected smoothly. The problem I am havings is no spark at the coils. Checked everything and nothing comes up. Change crankshaft position sensor did timing...
1-10 of 10 Results