Mazda3 Forums : The #1 Mazda 3 Forum - View Single Post - MazdaEdit - Setup
View Single Post
post #5 of (permalink) Old 03-07-2014, 09:38 AM Thread Starter
okellyr
Senior Member
 
okellyr's Avatar
 
Join Date: Oct 2008
Location: New Jersey
Posts: 5,028
Send a message via MSN to okellyr
Tables

The following are the table listings and descriptions broken out into

  • Confirmed
  • Unknown/To Be Confirmed
And each table will be described in the following way

  • Table Name: Name of the Table
  • Map Source/s: Confirmed models, Years and ECU size
  • Section/Type: 1D, 2D, 3D map
  • Description: Missive describing the table
  • What it Does: What it does
  • X and Y Axis: what are the axis's in the table
  • Relationships: What other tables relate to the table

Confirmed

>> Diagnostic Trouble Codes / 1D Maps
Table Name: Multiple
Map Source: MZ3 2006 1Mb
Section/Type: 1D Maps/1D
Description: Various codes and their status
What it Does: Turn on or off the evaluation process for a specific health check process. There are two cells, and the first appears to be always off. The second cell is "x01" for on and "x00" for off. If off the ECU will not evaluate or test the item, if On it will. For example, if the second 02 sensor is disconnected and the reliant table entry is x01; a CELL of p0140 will occur and the check engine light will illuminate... however if the second cell is adjusted from x01 to x00 the ECU will not check for this error and will not trigger a CELL
X and Y Axis: N/A
Relationships: ECU Diagnostics and reporting
>> Diagnostic Trouble Codes / 3D Maps / DTC List and Mask tables
Table Name: DTC List and Mask tables
Map Source: MZ3 2006 1Mb
Section/Type: 3D Maps/3D
Description: DTC HEX information
What it Does: Do not really know how to interpret this information. All info is in HEX and do not believe it would be wise to adjust any information in either table
X and Y Axis: N/A
Relationships: ECU Diagnostics and reporting

>> Fuel / 1D Maps
Table Name: Injector Scaling
Map Source: MZ3 2006 1Mb
Section/Type: 1D Maps/1D
Description: Engine fuel injector scaler
What it Does: represents and allows u to adjust the the size of the injectors
X and Y Axis: N/A
Relationships: Injector Lag Time

>> Fuel /3D Maps
Table Name: Injector Lag Time
Map Source: MZ3 2006 1Mb
Section/Type: 3D Maps/3D
Description: Fuel injector scaler
What it Does: represents and allows u to adjust the the size of the injectors. The MAP reading is in scaled from 102 to -15 / 0 is sea level / Positive KPa's are measurement of vacuum and negative KPA's are positive = its inverted.... 1bar is 0, 0bar is 102 and -15 KPA would be 1.x bar
X and Y Axis: KPa ( MAP) X Voltage.
Relationships: Injector Scaling

Unknown/To Be Confirmed
Table Name: D01
Map Source: MZ3 2006 1Mb
Section/Type: 2D Maps/2D
Description: Unknown function
What it Does: Unknown function
X and Y Axis: Unknown / Unknown
Relationships: Unknown

Boosted baby....

BOOSTED


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by okellyr; 05-12-2014 at 01:40 PM.
okellyr is offline  
 
 
For the best viewing experience please update your browser to Google Chrome
8