Topic: My 3 is geting uppies :P upd. pg. 2 and 3 update !!! VIDEO PAGE 4 (Read 4050 times)

Maverick9110E · « **Reply #30 on:** January 17, 2007, 02:52:41 PM »

Freaking amazing man. what do u do for a living again? lol im in the wrong buisness...

HouRman · « **Reply #31 on:** January 17, 2007, 06:03:14 PM »

This is what my Mazda3 would look like if I made 50K a year and was single.

Only I'd have a completely rebuilt & beefy engine, NOS, and probably a custom 6-speed transmission. heh

jdesclafani · « **Reply #32 on:** January 17, 2007, 06:04:34 PM »

Quote from: HouRman on January 17, 2007, 06:03:14 PM

This is what my Mazda3 would look like if I made 50K a year and was single.

Only I'd have a completely rebuilt & beefy engine, NOS, and probably a custom 6-speed transmission. heh

50K and single??? where do u live in the boondocks?? u'd be homeless around here

blam · « **Reply #33 on:** January 17, 2007, 06:15:32 PM »

Quote from: HouRman on January 17, 2007, 06:03:14 PM

This is what my Mazda3 would look like if I made 50K a year and was single.

Only I'd have a completely rebuilt & beefy engine, NOS, and probably a custom 6-speed transmission. heh

no, it wouldn't....50K a year is not a lot....i know from experience.

well..it could if you never go out, and spend check to check on car parts....and only car parts.

BLACK MZ3 · « **Reply #34 on:** January 17, 2007, 06:25:18 PM »

50k can be a lot of money in certain parts of the country

if i as making 50k here in dallas, i'd have an evo and looking for a house. when land is cheap, you get the most for your money.

blam · « **Reply #35 on:** January 17, 2007, 06:46:08 PM »

a decent single house here averages $350 000 right now....most condos condo goes for 225 000 + condo fees ($250/mnth)

a mazda 3 costs about 25 000

and parts cost roughly 20-30% more.

50k a year is nothing here =(

3 years ago it was decent.

WinningBlueMica`05 · « **Reply #36 on:** January 17, 2007, 06:59:01 PM »

wow your car is amazing !!!! I am digging the orange.......when do we get to see some exterior shots ??

BLACK MZ3 · « **Reply #37 on:** January 17, 2007, 07:08:25 PM »

he has already posted pics a loooong time ago.

Fissiongrid · « **Reply #38 on:** January 17, 2007, 07:24:12 PM »

EDFC! Love the EDFC. Gotta get it.

WinningBlueMica`05 · « **Reply #39 on:** January 17, 2007, 08:30:50 PM »

Quote from: the415 on January 17, 2007, 07:08:25 PM

he has already posted pics a loooong time ago.

where do i find them ??

LethaL3 · « **Reply #40 on:** January 17, 2007, 08:42:44 PM »

Quote from: eurotuner on January 17, 2007, 11:45:21 AM

what is that control unit u got? i mean its a A/F but is it only an A/F? brand?

it is a plx wideband, and i have the tein edfc below it and a pyrometer from auto meter, and the apexi rsm

Quote from: TEXAS2LO on January 17, 2007, 12:19:31 AM

what guage are those on the side pillar ?
brand + model ..
looks like a good match !
also great job on the ride buddy 8)

its the autometer phantom

and also the exterior pics are here

http://www.mazda3forums.com/index.php?topic=54561.0

thanks guys for all the comments, mans gotta try to have his ride hot

p.s i got really everything sam has hehehe, he almost didnt belive me when i contacted him.
mad props to him, he is probably the BEST auto accesorie salesman ever ! recomend him and his company 100%

island warrior · « **Reply #41 on:** January 17, 2007, 09:18:26 PM »

WoW :D

Too much to handle right now...

maudi3 · « **Reply #42 on:** January 17, 2007, 09:40:45 PM »

Tight !!!

mazduh. · « **Reply #43 on:** January 17, 2007, 10:40:46 PM »

Definately jealous of your suspension, turbo, and seat.

BLACK MZ3 · « **Reply #44 on:** January 17, 2007, 10:42:58 PM »

Quote from: LethaL3 on January 17, 2007, 08:42:44 PM

p.s i got really everything sam has hehehe, he almost didnt belive me when i contacted him.
mad props to him, he is probably the BEST auto accesorie salesman ever ! recomend him and his company 100%

i'll pass along the info.

blam · « **Reply #45 on:** January 17, 2007, 10:56:41 PM »

I am jealous of your 10-22mm =(

LethaL3 · « **Reply #46 on:** January 17, 2007, 11:49:44 PM »

Quote from: blam on January 17, 2007, 10:56:41 PM

I am jealous of your 10-22mm =(

its such a fucking nice lens!! just have to learn to use it right

blam · « **Reply #47 on:** January 18, 2007, 12:20:22 AM »

10mm isnt as wide as I thought it would be on a crop body

Fox Fader · « **Reply #48 on:** January 18, 2007, 09:07:29 AM »

Looks good, welcome to the world of FI

JDM Sam · « **Reply #49 on:** January 18, 2007, 03:14:21 PM »

Nice touch on making the GT Spec bar work with the EDFC. Let me know when you decide to go fully built motor as we have internals for it. Is the car put back together?

blam · « **Reply #50 on:** January 18, 2007, 03:31:37 PM »

^yes...i noticed that too....I just assumed GTSpec came out with a V2.0 of the bar lol.

superjudge · « **Reply #51 on:** January 18, 2007, 03:42:49 PM »

Nice work, there are alot of cool things to look at including the A/F/ meter, guages and stitching of the seats.

Keep up the good work. I like how the bar was adapted under the hood, is there any contact there?

nice job!

MZ3sZoomZoom · « **Reply #52 on:** January 18, 2007, 04:17:07 PM »

I envy your car big time.

BLACK MZ3 · « **Reply #53 on:** January 18, 2007, 04:23:04 PM »

magnus, where did you find that silver trim piece around the shifter? i didn't even notice it the first time i saw the pics.

blam · « **Reply #54 on:** January 18, 2007, 04:34:27 PM »

Quote from: the415 on January 18, 2007, 04:23:04 PM

magnus, where did you find that silver trim piece around the shifter? i didn't even notice it the first time i saw the pics.

BigTrucker and myself were thinking of making some and selling them on the forums.

I just need to get off my lazy ass and make the blueprint for it.

ramosdominicano · « **Reply #55 on:** January 18, 2007, 06:33:05 PM »

Wow! Great job on the ride. Awesome mods.
That's the same suspension setup I'm thinking about running.

LethaL3 · « **Reply #56 on:** January 18, 2007, 07:20:21 PM »

Quote from: JDM Sam on January 18, 2007, 03:14:21 PM

Nice touch on making the GT Spec bar work with the EDFC. Let me know when you decide to go fully built motor as we have internals for it. Is the car put back together?

i just finished the 3 inch stainless exhaust with a blitz nur muffler, and everything is together now, but the snow keeps me back, cant go and fine tune the engine yet. we will make some deal next fall

just a note, the blitz nur wont fit unless you modify the rear end alittle bit

Quote from: superjudge on January 18, 2007, 03:42:49 PM

Nice work, there are alot of cool things to look at including the A/F/ meter, guages and stitching of the seats.

Keep up the good work. I like how the bar was adapted under the hood, is there any contact there?

nice job!

thanks alot, this is exactly the point which i am going at, DETAILS, like no cylinder on the driver door and stuff like that. no the bar does not touch the carbon hood

Quote from: the415 on January 18, 2007, 04:23:04 PM

magnus, where did you find that silver trim piece around the shifter? i didn't even notice it the first time i saw the pics.

this is an oem accesorie from the euro catalog, and its EXPENSIVE

LethaL3 · « **Reply #57 on:** January 18, 2007, 08:09:51 PM »

UPDATE

or not so much update, just more pics :D

when the car finally got on the lift, hard to have a LOW car

exedy flywheel, forgot to take a pic of the stage 1 organic clutch press and plate

gotta love the turbo 8)

nap of the rear setup

excuse the phone pic, just taken tonight. my blitz nur muffler

the stainless 3 inch me and my buddies just welded togehter

ramosdominicano · « **Reply #58 on:** January 18, 2007, 08:33:05 PM »

Very, very nice!

Zodiac · « **Reply #59 on:** January 18, 2007, 11:02:19 PM »

Lethal,

I'm liking the bezeling around the shifter? Custom made or what? I'd like to get my hands on one.

The original Mazda3-based forum.

Author Topic: My 3 is geting uppies :P upd. pg. 2 and 3 update !!! VIDEO PAGE 4 (Read 4050 times)