Author Topic: aminzer's build....501whp  (Read 31405 times)

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
aminzer's build....501whp
« on: February 15, 2009, 03:05:07 AM »
well i figured id make a thread cause its 3am and i cant sleep lol. its been a really really really long adventure with this car, starting like 2 years ago when i first turbo'd it 30 min later blew out my automatic tranny, had that built, blew the engine, built the engine, swapped to 6 speed, doing all the conversions like cable throttle and wiring a universal aem and what not. i figure at this point i have way too much money in this car prolly almost more than anyone has put into a street mazda 3 and im prolly still not done. I dont think i could have afforded it had i not worked at a shop where most everything was cost pricing, and doing all the labor myself. Than just recently finally getting out all the bugs and running 20psi thru my gt28r the car was feeling strong prolly around 350whp at the time...and than blew the welds on the shitty weapon r intake manifold. Now today i just bolted on my gt35r well little more than bolt on but just started tunning for 20psi on that and than re cracked the manifold so i guess its time for a cosworth. but other than that i feel like ive learned a lot from all of this and should be able to set the new highest hp record for a street mazda 3 even including speeds.

mods so far:
garrett gt35r
hiboost manifold
tial 38mm wastegate
3in down pipe
hks high power exhaust
qtp electric exhaust cutout
Vibrant Front Mount Intercooler
hks ssqv bov
1000cc RC Engineering Peak and Hold Injectors
Cosworth Intake Manifold
eagle rods
arias pistons
custom billet crank
crower valve springs and retainers
crower stage 2 cams
cfm adj cam gears
6 speed tranny swap
spec stage 5 clutch
aem universal standalone engine managment
cable throttle body conversion
msd coils
aeromotive fuel pressure regulator with return line
16 gal fuel cell
dual walbro 255lph fuel pumps
plus more... thats the major stuff

heres a couple of pics first one is a little teaser from today with the new turbo


engine bay with old turbo


custom gauge cluster i made


6 speed


and thats it for now will update with new pics later and some vids


here is some exterior pics of the car






blown stock block


figure i add a vid this is a crappy cell phone vid at 20 psi on the gt28r untuned



pic on micky thompson slicks hehe


350hp pull


me vs 400hp+ srt 4






« Last Edit: July 03, 2009, 03:05:14 PM by aminzer »

Mr.E

  • (o\ ! /o)
  • Le Mans: GT Class
  • *****
  • Total Posts: 862
  • Site Posts: 863
  • Transaction Count: (3)
  • Location: Nashvegas
  • Date Registered: February 25, 2008, 11:42:45 AM
  • Car Make: Mazda
  • Car Model: 22v Hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #1 on: February 15, 2009, 03:42:42 AM »
woo hoo finally a thread!! gauges look good sick and i wanna see pics of your actual car too

ryukensfj

  • "Sex should be like a Civic; slow, obscene, and loud enough for the neighbors to hear."
  • F1 Driver
  • *******
  • Total Posts: 5872
  • Site Posts: 5921
  • Transaction Count: (10)
  • Location: San Marcos, CA / Tucson, AZ
  • Date Registered: June 15, 2006, 03:55:15 AM
  • F2 Turboed
    • cardomain
  • Car Make: Mazda
  • Car Model: 08 3s sport MT w/ 6cd/moonroof
  • Car Year: 2008
Re: aminzer's build....finally nearing completion
« Reply #2 on: February 15, 2009, 03:49:00 AM »
:popcorn:

btw you would have to beat 569 whp if you want to set the new highest hp record for a street mazda 3...
« Last Edit: February 15, 2009, 03:50:29 AM by ryukensfj »

tigermack

  • > AUTOX 3 <
  • Restricted Avatar
  • F1 Driver
  • *
  • Total Posts: 23348
  • Site Posts: 23449
  • Transaction Count: (38)
  • Location: Bay Area, CA
  • Date Registered: August 24, 2005, 07:45:43 AM
  • Meets are for ricers.
    • My noob pics
  • Car Make: Mazda
  • Car Model: The 1 & only FSP MZ3
  • Car Year: 2005
Re: aminzer's build....finally nearing completion
« Reply #3 on: February 15, 2009, 04:40:16 AM »
I like the RPM gauge in the middle.

Pretty crazy build.

akaveli

  • I Alwayz haz avatar Hottiez
  • F1 Driver
  • *******
  • Total Posts: 3485
  • Site Posts: 3493
  • Transaction Count: (14)
  • Location: Petersburg, VA
  • Date Registered: January 24, 2007, 11:33:19 PM
  • Mazda keeps failing...
    • My Hawt Car
  • Car Make: Honda/Acura
  • Car Model: RSX Type - S
  • Car Year: 2004
Re: aminzer's build....finally nearing completion
« Reply #4 on: February 15, 2009, 08:08:36 AM »
looking good man. Can't wait to get more details on the car.
|SOLD|

Emilian

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1867
  • Site Posts: 1868
  • Transaction Count: (4)
  • Location: Novi, Michigan
  • Date Registered: December 18, 2007, 11:42:41 PM
  • Car Make: Mazda
  • Car Model: Sunlight Silver 2.3L Sedan
  • Car Year: 2007
Re: aminzer's build....finally nearing completion
« Reply #5 on: February 15, 2009, 12:36:09 PM »
 :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:

boostedminime

  • Raping Evo's Since 05
  • F1 Driver
  • *******
  • Total Posts: 6987
  • Site Posts: 7091
  • Transaction Count: (6)
  • Location: tampa fl
  • Date Registered: March 21, 2007, 08:04:58 PM
    • squadronone
  • Car Make: Toyota/Lexus/Scion
  • Car Model: corolla sr5
  • Car Year: Older Than 1997
Re: aminzer's build....finally nearing completion
« Reply #6 on: February 15, 2009, 04:10:09 PM »
So you shooting for 600whp

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #7 on: February 15, 2009, 06:11:46 PM »
o yea thats been my goal to hit 600whp.... i dont see why i cant, i mean i have all the same shit for the most part as xenon929 did same turbo...but i have headwork and cams, which alot of turbo cars can pick up anywhere from 50 to 100 whp from cams so i figure 600 on race should be easily accomplished

boostedminime

  • Raping Evo's Since 05
  • F1 Driver
  • *******
  • Total Posts: 6987
  • Site Posts: 7091
  • Transaction Count: (6)
  • Location: tampa fl
  • Date Registered: March 21, 2007, 08:04:58 PM
    • squadronone
  • Car Make: Toyota/Lexus/Scion
  • Car Model: corolla sr5
  • Car Year: Older Than 1997
Re: aminzer's build....finally nearing completion
« Reply #8 on: February 15, 2009, 06:14:43 PM »
I hope you do it man that will kill most power records for a lot of sport compacts

Bright on3

  • Had to prove 'em wrong!
  • Le Mans: GT Class
  • *****
  • Total Posts: 658
  • Site Posts: 662
  • Transaction Count: (3)
  • Location: Knoxville, TN
  • Date Registered: February 19, 2007, 09:50:54 PM
  • 2004 Mazda3 Black Turbo, Mazdaspeed3 Transmission.
  • Car Make: Mazda
  • Car Model: 04' Hatch
  • Car Year: 2004
Re: aminzer's build....finally nearing completion
« Reply #9 on: February 15, 2009, 07:04:55 PM »
Did you swap tranny's with a speed? and is the tranny built??
« Last Edit: February 15, 2009, 07:14:26 PM by Bright on3 »
www.ReactiveRacing.com  ==  http://www.mazda3forums.com/index.php?topic=142266.0

Speed doesn't kill, it's the sudden stop that hurts ya'!
--2004 Black Mazda3 Turbo w/Speed3 Tranny Conversion-2inch drop springs-Eibach-Magnaflow--
--2002 Silver Mazda Protege5 5speed-Carbon fiber hood-upper/lower billet grilles-2inch drop springs--

LuisDC

  • Le Mans: Prototype Class
  • ******
  • Total Posts: 1382
  • Site Posts: 1383
  • Transaction Count: (0)
  • Location: phoenix,az
  • Date Registered: May 05, 2008, 11:39:54 PM
  • Car Make: Mazda
  • Car Model: Mazda 3 2.3L Sedan
  • Car Year: 2007
Re: aminzer's build....finally nearing completion
« Reply #10 on: February 15, 2009, 07:35:42 PM »
He will make 600hp :)
Angel Eyes, Advance timing, Fujita intake, Flex Inovations grounding kit, 2.0 Oil Conversion, triple guage pod, Glowshift oil pressure,fuel pressure, volts, AEM WideBand, vcts removal, LightWeight pullies, BSD Removal, Upgraded Rear motor mount, Upgraded Passanger Mount, TRZ Tranny Mount, vibrant header, vibrant exhuast, racing beat front sway bar+front endlinks,racing beat rear sway bar, TWM short throw shifter, EBC redstuff brake pads, Michelin pilot sport a/s plus

guido08

  • Grand Am Series
  • ****
  • Total Posts: 390
  • Site Posts: 390
  • Transaction Count: (1)
  • Location: North Jersey
  • Date Registered: June 05, 2008, 09:35:06 PM
  • Car Make: VW/Audi/Porsche
  • Car Model: a4 1.8t
  • Car Year: 2001
Re: aminzer's build....finally nearing completion
« Reply #11 on: February 15, 2009, 07:50:43 PM »
car looks sick man. waitin for some videos now
2001 audi a4 1.8t current

RIP 2004 Mz3: Trubendz 2.5in cat back, apexcone 6000k lows and fogs, black badges, f5 cai,progress lowering springs, dabears2k front bumper,smoked led tail lights

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #12 on: February 16, 2009, 12:36:50 AM »
Did you swap tranny's with a speed? and is the tranny built??

its a speed tranny and no its stock gears...il see how they hold lol

car looks sick man. waitin for some videos now
thanks...next weekend once i get the car up and running again with hopefully an intake manifold that holds il make some vids

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #13 on: February 16, 2009, 12:47:38 AM »
updated first post with more pics and a short vid when i had the gt28r on it

*txmica3*

  • F1 Driver
  • *******
  • Total Posts: 11563
  • Site Posts: 11644
  • Transaction Count: (16)
  • Location: Houston, Texas
  • Date Registered: August 11, 2006, 12:56:11 AM
  • wM12 "the squealer"
  • Car Make: Mitsubishi
  • Car Model: Evo VIII
  • Car Year: 2003
Re: aminzer's build....finally nearing completion
« Reply #14 on: February 16, 2009, 01:15:03 AM »
please ditch the intake manni.. every time your boost cracks another weld god kills a kitten.
Evo VIII: not stock.

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #15 on: February 16, 2009, 01:18:59 AM »
lol alex.....i actually accomplished something fast and the furious didnt lol...."your lucky you didnt blow the welds on the intake manifold"

Mr.E

  • (o\ ! /o)
  • Le Mans: GT Class
  • *****
  • Total Posts: 862
  • Site Posts: 863
  • Transaction Count: (3)
  • Location: Nashvegas
  • Date Registered: February 25, 2008, 11:42:45 AM
  • Car Make: Mazda
  • Car Model: 22v Hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #16 on: February 16, 2009, 01:23:01 AM »
i said that quote from the movie out loud when i first read that in your original post haha im a ricer

*txmica3*

  • F1 Driver
  • *******
  • Total Posts: 11563
  • Site Posts: 11644
  • Transaction Count: (16)
  • Location: Houston, Texas
  • Date Registered: August 11, 2006, 12:56:11 AM
  • wM12 "the squealer"
  • Car Make: Mitsubishi
  • Car Model: Evo VIII
  • Car Year: 2003
Re: aminzer's build....finally nearing completion
« Reply #17 on: February 16, 2009, 01:23:12 AM »
lol alex.....i actually accomplished something fast and the furious didnt lol...."your lucky you didnt blow the welds on the intake manifold"

you...

but...


:dur:


Evo VIII: not stock.

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #18 on: February 16, 2009, 01:24:55 AM »
i said that quote from the movie out loud when i first read that in your original post haha im a ricer

im deff not a ricer but i actually was just watchin that earlier today lol

2006 go zoom-zoom

  • wM61 "The Infamous Torpedo"
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2184
  • Site Posts: 2190
  • Transaction Count: (7)
  • Location: El Paso, Texas
  • Date Registered: September 23, 2007, 02:59:44 PM
  • Car Make: Mazda
  • Car Model: Mazda 3 Hatchback
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #19 on: February 16, 2009, 01:27:49 AM »
I can't wait to see the finished product.

                                             ^^ Click for more!! ^^/StreetUnit.com

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #20 on: February 16, 2009, 01:33:42 AM »
btw there isnt much left to do but im open to any sponserships but will not put stickers on my car

r0b

  • F1 Driver
  • *******
  • Total Posts: 9500
  • Site Posts: 9497
  • Transaction Count: (6)
  • Location: MD
  • Date Registered: January 10, 2005, 01:13:24 PM
    • http://i42.tinypic.com/2cp441e.gif
  • Car Make: Mazda
  • Car Year: 2008
Re: aminzer's build....finally nearing completion
« Reply #21 on: February 16, 2009, 01:35:17 AM »
lawl, u on ur own then foo, just like me.

2006 go zoom-zoom

  • wM61 "The Infamous Torpedo"
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2184
  • Site Posts: 2190
  • Transaction Count: (7)
  • Location: El Paso, Texas
  • Date Registered: September 23, 2007, 02:59:44 PM
  • Car Make: Mazda
  • Car Model: Mazda 3 Hatchback
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #22 on: February 16, 2009, 01:37:45 AM »
I have major respect for you turbo mz3's. Persistance pays off, that's the way I see it. haha

                                             ^^ Click for more!! ^^/StreetUnit.com

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #23 on: February 16, 2009, 01:38:18 AM »
lawl, u on ur own then foo, just like me.

you kiddin me you have a big p3 performance sticker on your car or were u reffering to the not much left to do

r0b

  • F1 Driver
  • *******
  • Total Posts: 9500
  • Site Posts: 9497
  • Transaction Count: (6)
  • Location: MD
  • Date Registered: January 10, 2005, 01:13:24 PM
    • http://i42.tinypic.com/2cp441e.gif
  • Car Make: Mazda
  • Car Year: 2008
Re: aminzer's build....finally nearing completion
« Reply #24 on: February 16, 2009, 01:39:59 AM »
its off, and just said performance actually.  lol

*txmica3*

  • F1 Driver
  • *******
  • Total Posts: 11563
  • Site Posts: 11644
  • Transaction Count: (16)
  • Location: Houston, Texas
  • Date Registered: August 11, 2006, 12:56:11 AM
  • wM12 "the squealer"
  • Car Make: Mitsubishi
  • Car Model: Evo VIII
  • Car Year: 2003
Re: aminzer's build....finally nearing completion
« Reply #25 on: February 16, 2009, 01:40:50 AM »
I have major respect for you turbo mz3's. Persistance pays off, that's the way I see it. haha

only problem is we're never done :lol:
Evo VIII: not stock.

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #26 on: February 16, 2009, 01:43:39 AM »
I have major respect for you turbo mz3's. Persistance pays off, that's the way I see it. haha

only problem is we're never done :lol:

i would like to be someday i have entirely too much money into this which i will never get back

2006 go zoom-zoom

  • wM61 "The Infamous Torpedo"
  • Le Mans: Prototype Class
  • ******
  • Total Posts: 2184
  • Site Posts: 2190
  • Transaction Count: (7)
  • Location: El Paso, Texas
  • Date Registered: September 23, 2007, 02:59:44 PM
  • Car Make: Mazda
  • Car Model: Mazda 3 Hatchback
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #27 on: February 16, 2009, 01:46:13 AM »
I have major respect for you turbo mz3's. Persistance pays off, that's the way I see it. haha

only problem is we're never done :lol:

lol. Hey, I'll hate to see the day I'm done modding my car. Yes, you'll get to enjoy all the hard earned money and work you put into it, but deep down inside you'll miss those headaches and long nights in the shop. :lol:

                                             ^^ Click for more!! ^^/StreetUnit.com

aminzer

  • 501whp pump gas bitch
  • F1 Driver
  • *******
  • Total Posts: 3018
  • Site Posts: 3020
  • Transaction Count: (7)
  • Location: Davidsonville Maryland
  • Date Registered: January 06, 2007, 07:44:56 PM
    • vivid motorsports
  • Car Make: Mazda
  • Car Model: Turbo 2.3L Titanium Grey hatch
  • Car Year: 2006
Re: aminzer's build....finally nearing completion
« Reply #28 on: February 16, 2009, 01:47:47 AM »
im not missing a long last night in the shop lol....i should take a pic of my arms i look like i gotta little emo

*txmica3*

  • F1 Driver
  • *******
  • Total Posts: 11563
  • Site Posts: 11644
  • Transaction Count: (16)
  • Location: Houston, Texas
  • Date Registered: August 11, 2006, 12:56:11 AM
  • wM12 "the squealer"
  • Car Make: Mitsubishi
  • Car Model: Evo VIII
  • Car Year: 2003
Re: aminzer's build....finally nearing completion
« Reply #29 on: February 16, 2009, 02:04:15 AM »
I have major respect for you turbo mz3's. Persistance pays off, that's the way I see it. haha

only problem is we're never done :lol:

lol. Hey, I'll hate to see the day I'm done modding my car. Yes, you'll get to enjoy all the hard earned money and work you put into it, but deep down inside you'll miss those headaches and long nights in the shop. :lol:

^ has some truth to it. david might just finally murder me for this one but i enjoyed it :lol: i still have the video we took when we fired up for the first time and it started after tearing down every inch of the drivetrain, getting the motor built, and putting it back in. THAT was the best feeling ever

especially since this is the first car ive ever modded. (hell, first car ive had period. :quiet:)
Evo VIII: not stock.